Manage Icloud Storage Setting Up Your New Nikon D3400 DSLR Camera

Setting up the Nikon D3400 is pretty straightforward. The first thing you need to do is to charge your battery. When you buy the camera you will receive a battery and a battery charger and although the battery may look like it is fully charged, it is worth just giving it an extra hour or so in the charger to make sure. Once you’ve charged it, you then place it into the camera. It can only go in one way so if it does not go in very easily, you are putting it in the wrong way. Then attach the lens. The lens and camera both have q white dot. Match the dots and gently fit it into the bayonet socket and then twist the lens anti-clockwise until it clicks.Although you get nearly everything you need in the box when you buy the camera for you to take pictures pretty much straight away, the one thing you do not have in you get the box is a memory card. Of course you need a memory card to store the pictures and the videos that you shoot on the camera. We suggest getting a SanDisk card and the reason for that is that SanDisk will guarantee the life of the card. It is important to remember they won’t guarantee what is on the card, but if the card fails SanDisk will replace the card. It is a little extra. So the way you put the card into the camera is in the side socket here. You open it up by pulling it slightly forward and you put the card in facing to you and just push it in until it clicks. What you will notice is that when you put it in completely, a green light flashes on the back of the camera to say that it’s being done properly. If you need to take the card out then you just press the card – it’s on a spring – and it will just bounce out again and then you can put it back in, very straightforward. On the other side are two other ports these are very useful because they are a USB port, which allows you to transfer your pictures directly from the camera to the laptop, and beneath that an HDMI port which allows you to show your pictures on a TV. Neither of these leads are available in the box so if you want to do either of those things you need to buy the leads separately. Once you’ve inserted your memory card, the next thing to do is to switch the camera on. But first what I would suggest you do is you take off the lens cap and activate the lens. What I mean is that you press the button on the side and you extend the lens out. You need to do this in order for the camera to work because if you don’t the camera won’t take any pictures. So once you have done that you can switch on the camera and once you have done that you will see, in the back screen, that you have got various choices to make. You choose your language – you do that by moving the Cross Keys left to right and up and down and then selecting the language by pressing OK. You choose your date in a similar fashion and you also then choose your time zone in exactly the same way, using the cross keys on the back.

All of these things can be changed later anyway so do not worry too much if you get them wrong, or in fact if you do not want to worry too much about them now and bypass those options and to return to them afterwards. But the next thing to do is to format your card, because if it is a new card, or an old card for that matter, you need to ensure that it is formatted correctly for this camera. So the thing to do now is to press the Menu button and that will take you into the menus and the one that you are looking for is the Setup Menu. That is down to the spanner icon. So you go down here and then the second one down is FORMAT MEMORY CARD. Now there is always an element of danger when you format memory cards, particularly once you have started using the camera. If you format the memory card you delete everything on it – even pictures that you think you have protected will be deleted so you need to be very careful when you format cards.However, when you are doing it for the first time you are perfectly at liberty to go to yes and click OK, and it will format the memory card and attune it to this camera properly. Now you are in a position to take a picture or shoot a video. You can either do this through the Liveview screen which enables you to see what is through the lens or you can do this through the more conventional DSLR way which is to look through the viewfinder. The viewfinder can be attuned to your eyesight so if you look through the viewfinder and, although the camera says what you’re looking at is sharp, it does not look sharp to you, you can use the Dioptric Adjuster which is on the side here to change the focal length of the viewfinder, which means that you can look through it and it looks sharp when in fact the camera says it looks sharp.That is very useful so take some moments just to focus and refocus on a few different things and just check that the viewfinder, when you are looking through it, looks sharp when the camera says that it is sharp. One of the things that I change almost straight away is the Auto Timer because cameras have timers on them now in order to help save the battery life and that means that sometimes they switch themselves off and it can be really annoying. But you can set your own Auto Timer lengths by going into the camera and into the Menu Settings so if you go into menu and you go into the Setup Menu then, by going down onto the next page – there are quite a lot of settings here, you will see AUTO OFF TIMERS as an option. If you select that then you can either select Short, Normal or Long which is a fairly generic term that talks about how long the camera will be on before it switches itself off or how long the back screen will be on before it switches itself off. Or you can go down to Custom and you can select those lengths of time that you prefer and that is what I do. I go down to Custom and check the ones that I want which are PLAYBACK and MENUS IMAGE REVIEW which is the length of time the images are on the back screen for you just to look at after you’ve taken it. LIVEVIEW which is the Liveview screen, and the STANDBY TIMER which is how long the camera sits on standby before it switches itself off. You can shoot pictures with this camera now, but the best thing to do is to select your image quality and your compression quality before you do. So the first thing to do is to go back into menus and in this instance we are looking at the Shooting Menu. If you go to there the first thing you come across is IMAGE QUALITY. Now image quality talks about compression rates not about the file size, but the compression rate is important. You can shoot RAW images with this camera but I would recommend, initially at least, shooting JPEG and the option I would choose would be JPEG fine because that is the best compression rate for JPEGs for this camera. Once you have done that you move one down to IMAGE SIZE and again there is no point shooting medium or small images with this camera. I would say the best thing to do is to shoot large images. Bear in mind that the memory card is probably big enough, with a 16 or 32 gigabyte memory, to shoot hundreds of pictures so you are not limited by memory space as we once were so there is no reason not to shoot large and not to shoot fine JPEG images. As we are in the Shooting Menu, why don’t we go down one more from IMAGE SIZE to ISO SENSITIVITY SETTINGS. When you switch the camera on for the first time then the settings are set so that the Auto ISO Sensitivity Control is on and that means that when you are in the basic preset, the camera will choose the ISO setting and if you look below the Auto ISO Sensitivity Control, it will set the maximum sensitivity according to what chosen there and when you get the camera and you switch it on for the first time the maximum is 25,600 now I would say that when you are taking normal pictures you probably do not want to go above 1600 – probably 3200. By leaving it as it is you allow the camera to choose far higher ISOs than you otherwise might wish, so if you go into this setting I would suggest that you make the maximum setting as I say 6400 probably, and I would also switch the ISO Sensitivity Control off because that then means that you have more control over the ISO in the basic settings and also in the manual settings. After setting the ISO I would stay in the Shooting Menu and move one down again to WHITE BALANCE. now it is important initially, I would say, that white balance is on AUTO. What white balance does is it sets the white in the picture. Now, if you know anything about colors, you know that white is a combination of all colors and so once the camera can set white it can also set the values for all the other colors. So it is very important and it is also very important if you are shooting somewhere where the balance of light is not normal – for example, if you are shooting in an office where the light may be slightly blue or if you are shooting at home under artificial light where the color of the light might be slightly yellow. You are not going to see this with your naked eye because your brain manages to filter those tones and those colors out, but the camera will see it and it is important that the camera initially is on AUTO so that it can set the white balance itself and try to balance all of the different color components that it sees through the lens.

The last thing I want to show you is very useful once you’ve taken your pictures. If you go into Playback Menu once you have taken a picture and go down to PLAYBACK DISPLAY OPTION then you will see that you have options that give you information on the picture once you’ve taken it. So you have got the options of showing the HIGHLIGHTS the RGB HISTOGRAM SHOOTING DATA and OVERVIEW. These are really useful bits of information and they are useful for you to recall and go back to once you have taken the picture and you just want to see what settings you had, or actually during the live shoot when you can see with the RGB histogram or the tonal histogram where your picture may be failing or just not working to its optimum. So they are very useful things to have, and by allocating and switching those on when you go into playback mode and you look at your pictures by pressing the cross keys up or down you will be given these pieces of information with the picture also viewable on the view screen. It is a really useful way of just keeping control and keep an eye on the various options and settings that you have when you take a picture. So, for example, it will give you the histograms but also the ISO. It will give you the focal length, it will give you all the various autos in terms of white balance or whether the flash was on etc. In the old days when you were shooting with film you would have taken a notebook and written all of this down but because it is available on the back screen it makes it a whole lot easier.

Top VR Games for Your Android Phone

VR or virtual reality is the new innovation by the tech world that has become an integral part of almost all sorts of games online. Virtual reality is a three dimensional environment that would render live and interactive experience to the gamer. There games are being designed to enhance the quality of the games and to give an awesome gaming experience to the gamer. The more innovative and user-friendly versions of these VR games are coming up in these days that are compatible enough even on smart phones.

Latest VR games would allow you to play the game on multiple devices with a single gamer name. You can play while commuting also by using your android phones. The latest versions of VR games are designed in such a way that they would render the same experience as a pc, laptop or a play station. Now as we know what is a VR game is all about let’s look at few latest VR games designed for android phones,

• Mekorama VR – A puzzle game where you have to guide a small robot through various levels. At the beginning it’s quite simple because there will be few stones to be moved but the difficulty increases from one level to the next. In this game you use the controller to move the stones and show the robot the way to move up.

• Hunters Gate: A game for action lovers – You will become a savior of the world when the world has been attacked by demons and you have to keep them back. This is a fun-filled and graphically impressive game. This is a famous rolling game whose elements make you stronger over time and will teach you new skills. For playing this game you must use daydream controllers, and these controllers help you in keeping track of what’s happening from above, which reduces your too much interaction with the virtual movement.

• Need for Speed: A VR game for admirers of speed, the game enhances the sensation of speed by Virtual Reality and is probably the best racing game for Daydream-capable smart phones. An exciting ride is guaranteed because of its impeccable graphics and breakneck-pace. Besides that the choice of customization and car tuning made this game more enchanting and exciting.

• Gun jack 2: End of Shift – A game where you will be sitting on cannon on our solar system and fend off the attackers who are desperate to steal the minerals from our planet. You will be having immense arsenal weapons and can control everything with your gaze.